By providing a comprehensive benefits package that ensures employees are happy and healthy both inside and outside the office.
Mechanical Engineer 【12-25k】 | base Suzhou China
1. Conduct structural design, optimization, cost reduction, quality improvement, series, generalization, and standardization for products based on product, customer, and project needs.
2. Complete structural design, 3D modeling, 2D drawings, and tolerance fit analysis.
3. Improve processing technology.
4. Assemble and test the complete machine, and write process documentation reports.
5. Prepare process flows, SOPs/WIs, product manuals, and other technical documents.
6. Perform other tasks assigned by the supervisor.
1. Full-time bachelor’s degree or higher in mechanical engineering, automation, mechatronics, or related fields, with 3+ years of work experience or equivalent experience preferred.
2. Experience in the development of pharmaceutical magnetic stirrer products is preferred.
3. Proficiency in at least one mechanical drawing software.
4. Ability to read and understand relevant English technical documents.
5. Familiarity with mechanical principles, common material properties, GD&T, and mechanical processing technology, with a solid theoretical foundation.
6. Concept of structural cost, adept at identifying, analyzing, and solving problems.
7. Responsible, meticulous, practical, with good team cooperation spirit.
Suzhou, China.
Ms. Ma
Tel.: +86 18068037233
E-mail: hr@supermag.com
Motor Control Algorithm Engineer 【20-40k】| base Suzhou China
1. Developing and optimizing motor control algorithms.
2. Planning and conducting tests for motor performance and functionality.
3. Conducting tests for motor performance and functionality.
4. Documenting research and development activities and results.
5. Simulating and validating magnetic circuits and algorithms.
6. Additional responsibilities and tasks from supervisor.
1. Bachelor’s degree or higher in Electrical Engineering or related field with 5+ years of experience.
2. Proficiency in electromagnetics principles.
3. Proficiency in various motor control algorithms.
4. Familiarity with hardware design principles for motor control.
5. Experience with embedded software implementation for motor control algorithms.
6. Experience with testing methodologies for various motor types.
7. Proven software implementation of at least one mass-produced motor controller.
Suzhou China
Ms. Ma
Tel.: +86 18068037233
E-mail: hr@supermag.com
Hardware Engineer 【20-30k】| base Suzhou China
1. Design schematics and PCB for embedded hardware and power circuits.
2. Perform circuit debugging/tuning and documentation.
3. Select and evaluate components.
4. Conduct and improve EMC testing for complete machines.
5. Perform reliability testing for complete machines.
6. Assist in the registration and certification of complete machines.
1. Bachelor’s degree or higher in electronics or related field, with 3+ years of experience.
2. Proficiency in analog and digital circuit design, with relevant design experience.
3. Proficiency in designing embedded hardware and power circuits, and application of various interface circuits.
4. Proficiency in using circuit design and simulation software, as well as using oscilloscopes and other equipment.
5. Experience in EMC and high reliability design.
6. Experience in motor drive, switching power supply AC/DC, and other power circuit design is preferred.
7. Good team cooperation spirit.
Suzhou, China.
Ms. Ma
Tel.: +86 18068037233
E-mail: hr@supermag.com
Embedded Software Engineer 【15-25k】| base Suzhou China
1. Develop embedded software for microcontrollers.
2. Develop communication interfaces and human-machine interfaces (HMI).
3. Assist in hardware and system debugging/tuning.
4. Write and maintain technical documentation.
5. Perform other tasks assigned by the supervisor.
1. Bachelor’s degree or higher in Computer Science, Communication, Electronics, Automation, or related fields, with 3+ years of relevant work experience.
2. Proficiency in embedded C language development; familiarity with Verilog is a plus.
3. Familiarity with mainstream ARM development platforms; knowledge of Linux operating system is a plus.
4. Ability to read and understand chip datasheets, circuit schematics, and work with hardware engineers for hardware debugging/tuning.
5. Proficiency in using basic testing tools such as signal generators, oscilloscopes, and logic analyzers.
6. Good professional ethics and teamwork spirit, strong learning ability, communication, and coordination skills.
Suzhou, China.
Ms. Ma
Tel.: +86 18068037233
E-mail: hr@supermag.com
R&D Engineer 【12-20k】| base Suzhou China
1. Responsible for the research and development and debugging/tuning of system control.
2. Plan and develop research schemes for system control testing.
3. Implement debugging/tuning schemes for system control and organize test results.
4. Summarize problems encountered during the debugging/tuning process and organize documentation.
5. Perform other tasks assigned by the supervisor.
1. Bachelor’s degree or higher in Electronics, Measurement and Control, Automation, or related fields, with 2+ years of relevant industry experience.
2. Understanding of embedded programming and familiarity with common hardware circuits.
3. Proficiency in using various testing instruments.
4. Strong learning ability and teamwork spirit.
Suzhou, China.
Ms. Ma
Tel.: +86 18068037233
E-mail: hr@supermag.com
Test Engineer 【15-25k】| base Suzhou China
1. Develop and standardize system performance testing procedures and specifications.
2. Design test schemes.
3. Develop and set up test platforms.
4. Manage test execution, summarize data, and complete reports.
5. Perform designated testing projects during the R&D and small batch production phases.
6. Perform other tasks assigned by the supervisor.
1. Bachelor’s degree or higher in Electronics, Measurement and Control, Automation, or related fields.
2. Experience in setting up motor test platforms and knowledge of national standards for motor testing.
3. Familiarity with pump motor test indicators and testing implementation methods.
4. Strong learning ability, good analytical, and problem-solving skills.
Suzhou, China.
Ms. Ma
Tel.: +86 18068037233
E-mail: hr@supermag.com
Technical Support Engineer 【12-18k】| base Suzhou China
1. Install, debug/tune, and maintain company products at customer sites, and compile customer feedback for the product development department.
2. Demonstrate good stress management and communication skills, and adapt to 1-2 weeks of business travel or on-site service per month.
3. Participate in the debugging/tuning and testing of the company's own equipment and proficiently operate company products.
4. Engineer and validate new technologies, solutions, and products at customer sites.
5. Conduct pre-sales customer training and analyze and resolve technical issues encountered during product usage at client sites.
6. Propose product improvement strategies, validate them, and continuously improve key indicators such as product capacity and yield.
7. Summarize and feedback after-sales product technical issues and improvement experiences to R&D and quality departments to promote product upgrades.
8. Perform other tasks assigned by the supervisor.
1. Bachelor’s degree or higher in Mechatronics, Electronics, or related fields, with 2+ years of work experience.
2. Responsible, team-oriented, proactive, analytical, and good at communication.
3. Familiarity with motor and semiconductor industry equipment is preferred.
4. Willingness to business travel.
Suzhou, China.
Ms. Ma
Tel.: +86 18068037233
E-mail: hr@supermag.com
磁悬浮研发工程师【20-30k】｜base 桂林
1.全面主导公司质量管理体系的策划、推行及落地，对质量管理体系的充分性、适宜性、有效性负责；
2.负责组织和实施产品全生命周期的风险识别、评价和控制等风险管理活动；
3.策划与组织内外部审核、管理评审，以保证ISO13485、GMP管理体系日常运行的有效性。推动不符合项的纠正预防措施，指导相关部门进行整改，跟踪措施有效性；
4.参与供应商开发审核及考核，辅导供应商提升品质保证能力。完善材料检验、过程巡检、成品检验规范与标准；
5.督导相关部门和岗位人员贯彻执行医疗器械的标准、法规、规章和规范，组织或协助开展质量管理培训，提升公司整体法规意识和管理水平；
6.体系文件发行、修改、回收及外部借阅等管理工作；
7.协助上级完成其他需要完成的工作等。
1.本科以上学历，机械、电气电子、自动化及软件等相关专业；
2.熟练掌握GMP医疗器械质量管理规范及相关法规、ISO13485体系标准，持有内审员证书；
3.8年以上从事医疗器械相关产品质量管控、体系建立方面的工作经验，具备独立担当的能力；
4.熟悉电子、结构、塑胶等各类材料特性及检验标准；
5.具有丰富的异常处理经验和供应商辅导能力，有一定风险评估能力；
6.具有良好的领导管理能力，判断力和决策能力；
7.有三类有源医疗器械产品工作经验优先考虑。
苏州，上海
